The Geekvape Soul Replacement Pods work with both the Soul (1500mAh) and Soul 2 (2100mAh) kits. Each 2ml refillable pod features a built-in mesh coil in either 0.6Ω or 1.0Ω resistance, covering loose MTL to RDTL vaping styles. The 0.4Ω option runs hotter for more vapour but only fits the Soul 2 kit. Available in standard and Boost versions, with the latter using VPU mesh technology for enhanced wicking and leak resistance.

Side-fill port makes refills quick without removing the pod. Top airflow design minimises leaking by keeping e-liquid away from the mouthpiece. Transparent body lets you check remaining juice at a glance. Sold in packs of two, these pods typically last 1-2 weeks before flavour fades.

Specifications

Pack Size: 2 Pods

Pod Capacity: 2ml (TPD compliant)

Coil Type: Built-in Mesh Coil (0.4Ω / 0.6Ω / 1.0Ω)

Filling Method: Side-fill

Compatible Devices: Soul (1500mAh), Soul 2 (2100mAh) - 0.4Ω only works with Soul 2

Recommended E-Liquid: salt nicotine or 50/50 e-liquids

Power Range: 0.4Ω: 30-35W (RDTL) | 0.6Ω: 15-30W (Loose MTL) | 1.0Ω: 5-15W (MTL)

Pod Versions: Standard or Boost (VPU mesh technology)

Key Features

• Three Resistance Options – 1.0Ω delivers tight MTL with minimal vapour. 0.6Ω provides looser MTL/RDTL with warmer hits. 0.4Ω (Soul 2 only) pushes more power for bigger clouds.
• Standard and Boost Versions – Boost pods use VPU mesh technology for better flavour and improved leak resistance. Standard versions still perform well for everyday use.
• Top Airflow Design – Airflow comes from above the coil, keeping e-liquid away from the mouthpiece to reduce leaking. Adjustable airflow ring lets you dial in your preferred draw.
• Side-Fill Port – Fill opening sits on the pod's side. Just flip the rubber stopper, fill through the port, and seal it back without removing the pod from your device.
• Built-In Mesh Coil – Pre-installed mesh coil heats e-liquid evenly for cleaner flavour. When taste drops off or you get burnt notes, swap the whole pod.

Core Advantages

Dual Kit Compatibility with Power Flexibility

These pods fit both Soul and Soul 2 devices, though the 0.4Ω option needs the Soul 2's extra power. If you upgrade from Soul to Soul 2 later, your existing 0.6Ω and 1.0Ω pods still work. Gives you flexibility without needing completely different pod stock for each device.

Boost Version VPU Mesh Technology

Boost pods use Geekvape's VPU mesh coils for improved wicking and flavour output. Vapers report these handle 50/50 e-liquids better with less chance of dry hits. The enhanced leak-resistant build addresses one of the main complaints with standard pod versions. Worth the slight price bump if you've had leaking issues.

Top Airflow Leak Prevention

Airflow enters from the top of the pod rather than the bottom, which keeps e-liquid from seeping into the airflow channel. Combined with the side-fill design, this setup cuts down on the common leaking problems that plague bottom-airflow pods. Users putting 30ml through a single pod report minimal seepage when filled correctly.

FAQs

Which Soul kits work with these pods?

0.6Ω and 1.0Ω pods fit both Soul (1500mAh) and Soul 2 (2100mAh) kits. The 0.4Ω pod only works with Soul 2 because it needs 30-35W power that the original Soul can't deliver.

What's the difference between standard and Boost pods?

Boost versions use VPU mesh technology for better wicking, flavour, and leak resistance. Standard pods work fine for everyday vaping but Boost versions handle higher-PG liquids better and last slightly longer before flavour drops off.

How long does each Soul pod last?

Typically 1-2 weeks depending on how heavily you vape. Some customers report pushing 30ml+ through a single pod before needing replacement. Replace when you notice muted flavour, burnt taste, or reduced vapour.

What e-liquids work best with Soul pods?

Nic salts and 50/50 e-liquids give best results with all three resistances. High PG blends also work well. The Boost versions handle slightly thicker liquids better than standard pods.

How do I prevent leaking with Soul pods?

Use the top airflow adjustment properly and don't overfill past the max line visible through the transparent body. Make sure the side-fill rubber stopper seals flush after refilling. Let pods sit 3-5 minutes after first fill to allow wicking. The top airflow design already minimises most leak issues.