Aspire Gotek Replacement Pod

Mesh Coils (0.6Ω/0.8Ω), 2ml Capacity, Side-Fill, TPD Compliant, Compatible with Gotek Kits, 2-Pack Value.

Coil style

Same day dispatch on weekdays by 6:30pm, and weekends by 12pm
Free UK shipping Over £20
Sign up & get £10 off £99+ orders

Looking for a straightforward pod replacement that actually lasts? These refillable Gotek pods work with your Aspire Gotek X, Gotek X3, Gotek Pro, Gotek Nano, and Gotek S kits. Each pod holds 2ml of e-liquid with a built-in mesh coil that you simply swap out when it's done – no faffing with separate coils.

We stock both 0.6Ω and 0.8Ω versions. The 0.8Ω delivers a tighter, cigarette-like draw perfect for MTL vaping with nic salts, whilst the 0.6Ω opens things up for a slightly airier RDTL hit with richer vapour. Quick note: 0.6Ω pods work with the Gotek X3, Pro, and Nano only – not the Gotek X or S due to power limits. TPD compliant at 2ml, these pods typically last 2-3 weeks with regular use, though sweeter bar salt liquids might shorten that to around 10ml.

Key Features

Built-In Mesh Coils (0.6Ω / 0.8Ω) – Enhanced flavour delivery without needing separate coil changes
2ml TPD Compliant Capacity – Full day's vaping for most users, legal across the UK
Side-Fill Design – Simple silicone plug access, no mess
Wide Device Compatibility – Works across Gotek X, X3, Pro, Nano, and S kits (check resistance compatibility)
2-Pack Format – Solid value at under £5 with proper care

Core Advantages

Proper Pod Lifespan

These pods handle multiple refills without turning rancid. Vapers report 2-4 weeks from a single pod with standard 50/50 liquids – that's roughly 20ml before you'll notice flavour drop-off. Sweeter formulations burn through faster, but you'll still get decent mileage.

No-Leak Side Filling

The 2ml version sorts the leaking issues that plagued earlier 4ml variants. Pull the side plug, top up your nic salt or 50/50 juice, seal it, and you're done. Keep the fill level sensible and the silicone does its job.

MTL-Focused Design

Both resistances support mouth-to-lung draws that suit ex-smokers. The 0.8Ω gives you that familiar tight pull with 20mg salts, whilst 0.6Ω vapers get slightly warmer vapour and fuller flavour without drifting into cloud-chasing territory.

Specifications

Specification	Details
Pack Size	2 Pods
Pod Capacity	2ml (TPD compliant)
Coil Resistance	0.6Ω / 0.8Ω (built-in mesh)
Compatible Devices	Gotek X, X3, Pro, Nano, S*
Recommended E-Liquid	50/50 VG/PG, nic salts
Fill Method	Side-fill port
Vape Style	MTL / RDTL
Weight	14g (per pod)

How To Use

FAQs

How long does each pod actually last?

Most customers get 2-3 weeks from one pod with regular use – that's about 20ml of standard liquid. Sweeter bar salts tend to gunk up the mesh coil faster, closer to 10ml. If you're tasting burnt notes, bin it and swap in a fresh pod.

Will these fit my Gotek X kit?

Yes, but stick to 0.8Ω pods only. The Gotek X and S don't have enough power for 0.6Ω versions. The X3, Pro, and Nano handle both resistances fine.

Any tricks to stop leaking?

Don't overfill past the max line, and make sure the silicone plug clicks shut properly. The 2ml pods are far more reliable than the older 4ml versions. If you're storing the kit on its side for hours, expect minor seepage – it's physics.

What e-liquid works best?

50/50 blends and nic salts up to 20mg suit both resistances. Thicker high-VG liquids struggle with wicking in these pods and can cause dry hits. If you're after throat hit, pair 20mg salts with the 0.8Ω version.

Can I clean and reuse pods?

The coil's fixed inside, so once flavour goes off or you get that burnt taste, replacement's your only option. Some vapers rinse pods between flavour swaps, but results vary – usually better to just change it.